1. Dramatically Reduces Vibration

2. Tunable

3. Increased Control Mounting Room 

4. Variety of Bends

5. American Made With The Highest Quality Materials

Scrambler

• For racers, the best bends are a 14° Moto Standard or 15° Moto Standard.
• For recreational riders, the 14° Moto High or 15° Moto high is best.
• The ROX 4”-6” Adjustable Risers are required. The ROX Dash will work, but sets the dash very low above the tank plastics.
• Another dash relocation solution is the Jay Parts Polaris Scrambler Dash Relocation for Flexx Handlebars. A little more expensive, but is a clean setup and utilizes the rear crossbar location.
• Low bars will not work.

Sportsman

• Same application as the Scrambler XP1000S

JAY PARTS POLARIS DASHBOARD MOUNT FOR FLEXX HANDLEBARS

https://www.jay-parts.com/en/jayparts-shop/polarisdashboard/

JAY PARTS DASHBOARD WORKS WITH

Polaris Scrambler 850*, 2013+

Polaris Scrambler 1000, 2013+

Polaris Scrambler 1000S (55")*, 2020+

Polaris Sportsman 850*, 2009+

Polaris Sportsman 1000*, 2009+

Polaris Sportsman 1000 S (55"), 2020+

*With square speedo unit in conjunction with Fasst Flexx handlebars. ROUND ANALOG SPEEDOMOTER ON SOME POLARIS BASE MODELS WILL NOT WORK.

• Our Quad Bars are 31 inches wide, while our Moto Bars are 32 inches wide. 
• All Quad bends offer 9” of handle room, over an inch more than a traditional bar.
• All Moto bends offer 9.5” of handle room, over 1.5 inches more than a traditional bar.
• We have a new low bar that’s 68mm tall. This means we now have 3 different bar heights: 68mm, 92mm, and 116mm.
• The 92mm bar was previously referred to as the “Quad Low”, it’s now referred to as the “Standard” height. The 68mm tall bar will now be refferred to as the "Quad Low". The 116mm “Quad High” will go unaffected.
• If running a low bar on a TRX or YFZ,  a +1 stem is needed for the bar to clear an oversized fuel tank
• Flexx Handlebars are 1 1/8" at the mounting section and 7/8" at the handles. 
• On ATV’s the ideal backsweep is usually a 14° or a 15°, pending your height and what kind of riding you’re primarily doing. Most ATV’s come stock with a bar most identical to our 15* Quad High.
• Traditionally taller riders prefer a straighter bar like the 14°.
• Check out our ATV Bar Bend Chart HERE.

Flexx Handlebars are an investment. Consequently we spend more time helping customers determine the right bar bend for them and their preferences than any other handlebar brand. This is known as ergonomics, the study of ones efficiency in their working environment. 

With Flexx Handlebars not only do you have a variety of bar bends at your fingertips to run exactly what works best for you, but you also get unparalleled abuse reduction. This provides you with the highest performing handlebar available, combining less vibration, subdued impacts, and improved ergonomics for a better day riding. You can learn more about our philosophy with abuse reduction HERE.

Click the link below to see more detailed bar bend information. We have a list of OEM bar bends as well as popular bar bends, and what our most comparable bar bend is. 

Already have Flexx Bars but aren't sure what bend they are? Click HERE to help identify which bar bend you have. 

 Bar Bend Guidance

Curious which bar bend to run? Take a minute to read through our bar bend blogs! Don’t hesitate to holler with any questions or concerns regarding bar bend, we’re here to help and more than happy to do so!