|
| |
| |
See Legend below for chart codes
| Gas Gas - All |
6.0
F/R |
| CR 125/250/500:
up to 01 |
6.0 F, 6.3 R |
| CR 125/250/450F:
02-07 |
6.0 F, 6.5 R |
| CR 85/150: 07
current: |
5.6 F/R |
| CR 80/85: up
to 06 |
6.0 F/R |
| XR 250/400/600/650R:
all |
6.0 F/R |
| XR/CRF 80/100:
all |
5.0 F/R |
| CRF 150/230:
all |
5.6 F/R |
| XR/CRF 50: all |
4.0 F/R |
| All models:
up to 99 |
6.2 F/R |
| All models: 00-05 |
5.6F, 6.0 R |
| All models: 06-07 |
6.8 F/R |
| KX 60/65: all |
5.0 F/R |
| KX 80/85/100:
99-06 |
6.0 F/R |
| KX 125/250/500:
up to 99 |
6.0 F 6.3 R |
| KX 125/250/250F:
99-04 |
6.7 F/R |
| KX 125: 05-07 |
6.7 F/R |
| KX 250: 05-07 |
6.0 F 6.7 R |
| KX450F/250F:
06-07 |
6.0 F 6.7 R |
| KLX 250/300:
all |
6.0 F/R |
| KDX 200/220:
all |
6.0 F/R |
| All full size
models |
6.8 F/R |
| 65: all |
5.6 F/R |
| RM 80: all |
5.0 F/R |
| RM 125/250/RMZ250F:
00-04 |
6.2 F, 6.7 R |
| RM 125/250: 05 |
6.2 F, 6.7 R |
| RMZ 250F/450F:
05-07 |
6.0 F, 6.5 R |
| DR/DRZ 250/350:
all |
6.0 F/R |
| DRZ 400: 00-05 |
6.0F, 6.5R |
| YZ 125/250/400:
up to 99 |
6.0 F, 6.2 R |
| YZ 125-250 / 250-400-426-450F:
99–04 |
6.2 F, 6.7 R |
| YZ 125/250: 05 |
6.2 F, 6.5 R |
| YZ 250F/450F:
05 |
6.2 F, 6.7 R |
| YZ 250F/450F:
06-07 |
6.2 F, 6.5 R |
| YZ 80/85: all |
5.6 F/R |
| TTR 250: all |
5.6 F, 6.0 R |
| TTR 125: all |
5.6 F/R |
| TTR 50: all |
4.0 F/R |
| Pre-1980 ** |
5.6 F/R ** |
| 1980 to current ** |
6.0 or 6.2 (see below) ** |
| We have narrowed down the Harley-Davidson applications to 3 sizes, 5.6, 6.0, and 6.2. This has been very difficult due to the vast number of units sold. Above are the head sizes that Harley Davidson orders from us as well as the general size by decades. If you have any questions or feedback shoot us an email or call so we can get you the correct head for your wheels. |
| Splinedrive |
Universal |
| |
Application Chart Legend:
F - fits front
R - fits rear
F/R - fits front and rear
Head
sizes: 4.0, 5.0, 5.6, 6.0,
6.2, 6.3, 6.4, 6.5, 6.7,
6.8, 7.4 and Spline Drive. |
| |
We make heads to fit most nipple
sizes. If your model is not listed
or if you have any questions
please call us at (562) 439-1025. |
|
|
|
 |
| |
|
|
|
|
|
 |
|
 |
|
|
 |
|
|
|
| |
 |
| Call us at 562-601-8119 Ext 1# for technical support
and ordering assistance. |
|
|
|
 |
| |
 |
|
|
"The Fasst Company Spoke Torque wrench is one
of my favorite tools! No one should work on their wheels
without this wrench. I use it on a daily basis, whether
it’s on factory wheels or my kid’s bikes
there is just no other wrench to use on spokes. I haven’t
used anything else on my wheels since 1999."
- Mike Gosselaar |
|
|
|
|
|
|
|
|
|
